In a conventional chamber, uneven temperatures cause condensation inside instruments, reducing drying efficiency. This issue is almost non-existent in the iClave plus when temperatures rise or fall.
Air turbines, contra-angles, and other dynamic dental instruments consist of high-precision micro mechanisms and therefore benefit from careful sterilisation to maintain performance. NSK choose to use a highly conductive copper chamber to satisfy Class B, Europe’s strictest sterilisation standard. The system delivers outstanding efficiency despite its large capacity.
The iClave plus can fully use its 18 litre capacity because it maintains even temperatures throughout the autoclave chamber and constantly controls the surface temperature. The iClave plus offers 20% more sterilisation space than a conventional stainless steel chamber of the same size, ensuring greater safety by reducing instrument overcrowding.
Using copper to construct the chamber gives 18 times more heat conductivity than stainless steel. The copper chamber retains even internal temperature levels throughout despite its large capacity.
NSK’s innovative heating system optimises the high heat conductivity of copper. Enveloping the copper chamber is a special heater which is also used in satellites, incorporating electro-thermal material embedded in silicone to heat the entire chamber evenly without heat loss.
Employing a copper chamber to minimise internal temperature fluctuations. Efficiently sterilising more instruments while minimising wasted space.
MODEL: iClave plus 230V ORDER CODE: Y1003077
External dimensions : W445 x D532 x H428 (mm)
Chamber dimensions : ø240 x 384 (mm)
Chamber capacity : 18 litre
Net weight : 55 kg
Maximum power consumption : 1,900 W
Supply Voltage CE : 230V - 50Hz
Air expulsion system : Vacuum pump 1, 3, 4 vacuum
Max Load : 4 kg (solid), 1.5 kg (porous)
External dimensions exclude protrusions